Motorcycle Bottom End Rebuild | Part 2 of 3: Crank & Bearings

Motorcycle Bottom End Rebuild | Part 2 of 3: Crank & Bearings

This is Part 2 of the Split Cases, Crank and Crank Bearing Replacement Video. Please refer to Part 1 for the previous dis-assembly. Using the Tusk Case Splitter. We’re going to go ahead and put this on the ignition side. And there’s a couple important things to remember with this tool. First of all it

Rekluse Radius X: Why You Should Get One

Rekluse Radius X: Why You Should Get One

I’ma try a different trail here today right over here sandy let’s see how we do go nice and slow intentionally, I’m gonna try to make it stall because that’s what I bought the darn Rekluse for dude! that’s absurd man! look at this it’s like a moped dude spend the money dude!!! spend the

Motorcycle Seat Cover Install

Motorcycle Seat Cover Install

In this video, we’ll demonstrate how to properly install a seat cover onto your motorcycle or ATV seat. You’ll need a couple of standard tools such as a flat-blade screwdriver and a pair of pliers. It’s always a good idea to have a pair of safety glasses as well. You’ll also need a staple gun

Valve Replacement on a Motorcycle or ATV | #RMATVMC

Valve Replacement on a Motorcycle or ATV | #RMATVMC

In this video, we’ll show you how to replace the valves on your motorcycle or ATV. We’ll need a few standard tools for this job along with this specialty tool. This is our Tusk valve spring compressor, and it’s a necessary tool for the valve replacement. At this point, we’ve already got our cylinder head

DIRT BIKE VS. CAR

DIRT BIKE VS. CAR

So what are you guys up to? Houston Motors have hooked us up with a Triton for the weekend. Hooked you guys up with a Triton? They’re keener than me. Where are you taking it? Bottom of the Maitai Valley, going to go over the Maungatapu on the bikes. Far out, you guys hear about

NCMP Main MX Track on KTM 300

NCMP Main MX Track on KTM 300

MAIN MX TRACK

MY-2014 | Prueba | KTM Freeride 250R & 350 Testride | English & Español

MY-2014 | Prueba | KTM Freeride 250R & 350 Testride | English & Español

Hello and welcome to 1000PS-TV. We are here in the offroad paradise of Il Ciocco (Tuscany) and today we had the opportunity to ride the new KTM Freeride. Iím standing here with KTM offroad department chief Bernhard Plazotta. Bernie, the Freeride 350ccm was released one year ago, tell me more about the updates for the

She’s in Love!

She’s in Love!

how’s it going guys today is gonna be an exciting day gonna finish up another one of my projects this time around it is the 2001 XR 80 this back here is my girlfriend’s bike we’ve been working on it over the past couple months – it’s a powder coat cerakote work just going through

How To Repack A Motorcycle/ATV Exhaust Silencer

How To Repack A Motorcycle/ATV Exhaust Silencer

Hi, I’m Eric from Rocky Mountain ATV/MC.com And today I’m going to show you how to repack a silencer for your ATV or motorcycle. You’ll need some allen wrenches, a rubber mallet, high temp silicone, and silencer repacking material. On most silencers you’ll need either a piece of PVC or a wooden dowel to knock

Motorcycle Bottom End Rebuild | Part 1 of 3: Engine Teardown

Motorcycle Bottom End Rebuild | Part 1 of 3: Engine Teardown

Hi, I’m Eric from Rocky Mountain ATV/MC.com. And today I’m going to show you how to split the cases, and to replace crank bearings and a crankshaft. We’ll need some common hand tools, and also some specialty tools made by Tusk. First of all we have our case splitter tool, our circlip pliers, our crank