how to paint Yamaha Nmax with subtitle

how to paint Yamaha Nmax with subtitle


In this step, I will be removing emblems using thread In this step, I will be removing emblems using thread In this step, I will be removing emblems using thread We can find this thread in our home As you can see, that’s how easy it is to remove. As you can see, that’s how easy it is to remove. Then, after this, if you want to use it again You will need a double sided tape You can find it in art or school supplies In this clip, I’m using sander In this clip, I’m using sander Although you can just hand sand it if you don’t this tool. What’s good about this is it makes the work easy and faster More or less it will speed up the work by 80% If you don’t have sander, just patiently hand sand it If you don’t have sander, just patiently hand sand it Also, I just want to mention how important this part is. Also, I just want to mention how important this part is. Here is where the paint depends on how it sticks with the part So, what I can suggest is take time on this part So, what I can suggest is take time on this part So that the hard work will pay off And the paint will not chip off Next step is cleaning If sanding is important, Same as this step. The part should be clean, free of oil and grease As much as possible, avoid or minimize in touching the surface As much as possible, avoid or minimize in touching the surface That will be painted There are times that this is the reason why there’s fish eye after painting or the paint will not adhere properly There are times that this is the reason why there’s fish eye after painting or the paint will not adhere properly There are times that this is the reason why there’s fish eye after painting or the paint will not adhere properly There are times that this is the reason why there’s fish eye after painting or the paint will not adhere properly Next step is priming Mixing ratio is 1:1 , 1 part primer, 1 part thinner then add a little bit of hardener Mixing ratio is 1:1 , 1 part primer, 1 part thinner then add a little bit of hardener Mixing ratio is 1:1 , 1 part primer, 1 part thinner then add a little bit of hardener For example, 50 ml of paint, then add 50 ml of thinner For example, 50 ml of paint, then add 50 ml of thinner then add hardener So that the primer will harden So that the primer will harden In this stage, this is where the result of base coating will depend In this stage, this is where the result of base coating will depend If in this part you see something is wrong There’s a good chance that you will see it once you spray the base coat There’s a good chance that you will see it once you spray the base coat That’s why in this stage, you are required to sand all the parts again So that when you apply the base coat So that when you apply the base coat The paint will land on a smooth surface The paint will land on a smooth surface Next is Base coating Same mixing ratio as the primer. 1:1 Then add catalyst I also advise that you avoid using acrylic paints, I also advise that you avoid using acrylic paints, Its just a headache, its cheap but not worth it It shows poor results like webbing It shows poor results like webbing It shows poor results like webbing It shows poor results like webbing So you are required to add thinner which contradicts for being cheap It may cost you a lot by using more thinner It may cost you a lot by using more thinner What I can suggest is use urethane paint It is easier to use than using acrylic It is easier to use than using acrylic At the same time it is much tougher because it has catalyst or hardener If the paint totally cures Even if you splash it with gasoline, The paint will not be damaged Since we’re using chameleon pigment The base color will be black Because it will produce more vibrant color and color shifting is more pronounced. Because it will produce more vibrant color and color shifting is more pronounced. Because it will produce more vibrant color and color shifting its more pronounced If you will compare it to light base colors But its up to you if you want to use lighter colors. However, since the manufacturer recommended using black base However, since the manufacturer recommended using black base That’s what we’re going to follow That’s what we’re going to follow, also in this stage If you’re seeing any dust or dirt on the paint This is the time to sand them off This is the time to sand them off So that when we apply the chameleon paint There’s no more dust or dirt Where in the chameleon part I”ve ordered it in lazada (online store like amazon) It cost 1200 php or 24$ It cost 1200 php or 24$ It’s 10 grams, enough for 1 motorcycle for cars, you might be using 40 or 50 grams for cars, you might use 40 or 50 grams But It really depends on how big the vehicle is We will be adding and mixing it with 350 ml of clear coat We will be adding and mixing it with 350 ml of clear coat Mixing ratio of clear coat is 3 :1: 1, 3 parts clear, 1 part hardener, 1 part thinner Mixing ratio of clear coat is 3 :1: 1. 3 parts clear, 1 part hardener, 1 part thinner since this will be our main basecoat, we will add more thinner since this will be our main basecoat, we will add more thinner since this will be our main basecoat, we will add more thinner So that we can apply it lightly As you can see, I’m just spraying it lightly It should have thin layers My trigger is around 25 percent Just spray thin layers until you get the right color Or you can use test paint, like bottles, just spray it with black base and then apply the chameleon Or you can use test paint, like bottles, just spray it with black base and then apply the chameleon Or you can use test paint, like bottles, just spray it with black base and then apply the chameleon Or you can use test paint, like bottles, just spray it with black base and then apply the chameleon It’s up to you on how you’re going to approach it, but for me, getting light coats is the right thing, we will get the right color slow and but surely Also we are trying to make all part sprayed evenly Also we are trying to make all part sprayed evenly Because consistency is very important If the part has two coats, then all should have to coats If the part has two coats, then all should have to coats If the part has two coats, then all should have to coats In this case, I have 3 coats of chameleon color I’ve applied it to all of the parts The way on how I applied the coats The way on how I applied the coats were the same to all of the parts So that the results will also be the same for all of the parts So that the results will also be the same for all of the parts I’ve applied 1 coat of clear, so that I can lightly sand the parts to remove dust or dirts before apply clear coat I’ve applied 1 coat of clear, so that I can lightly sand the parts to remove dust or dirts before apply clear coat I’ve applied 1 coat of clear, so that I can lightly sand the parts to remove dust or dirts before apply clear coat before we apply the clearcoat We are in the last part which is clear coating I’m using K-92 clear coat. Mixing ratio is 3 parts clear, 1 part hardener, 1 part thinner Mixing ratio is 3 parts clear, 1 part hardener, 1 part thinner In the first coat, You have to spray medium coat. Should not be that thick. Then, the succeeding coats which are the second and third coat, it should be heavy coats So we are done with clearcoating As you can see It was painted good. The color shifting is pronounced. You can see the color difference when viewed in an angle So it’s just needs to be assembled Also, to those people who wants to paint their motorcycle You have to have patience because it is tedious process and and you need
perseverance to things like this because it is tedious process and and you need
perseverance to things like this I hope that you’ve enjoyed this video If you have liked it, please like and subscribe If you have liked it, please like and subscribe

8 thoughts on “how to paint Yamaha Nmax with subtitle

  1. Thanks for viewing. Please support the channel for future content by liking and subscribing. Marami pa ko sishare sa inyo like diy fiberglassing, decals design, carbon fiber, design ng sarili plerings. Comment lang po sa mga katanungan nyo o kung kailngan nyo ng advice. I will reply as soon ad possible.

Leave a Reply

Your email address will not be published. Required fields are marked *